14 September 2006

Pad Driver

Starting with the well used piece of 20 grit sandpaper...



Then the 'Pad Driver' I made for my floor machine...


And...all together now...

Overall it's been working pretty well. After some initial tweaking of the bolt that holds everything together (had to drill a hole in it and put a cotter pin through it because the machines rotation kept loosening the bolt, and then I had to grind the end of the bolt down a little because it started touching the floor), the main problem I am running into is the 'varnish' I'm sanding off turning into lumps of goo making the sandpaper stick to the floor...it stops it from spinning and sometimes even rips it off the bottom of the machine.

0 Comments:

Post a Comment

Links to this post:

Create a Link

<< Home